GEOMETRIC COMPENSATION OF THE CLEARANCE DURING SAW BLADE RESHARPENING IN THE LINTERING PROCESS OF LINTER MACHINES

Authors

  • F.Z. Mamadaliev Andijan State Technical Institute. Author

Keywords:

cotton linter, saw cylinder, geometric compensation, resharpening, aerodynamic doffing, clearance evolution, 65G steel, multi-scale modeling.

Abstract

 This study investigates the multi-scale geometric-aerodynamic modeling of the lint separation (doffing) process in saw-type cotton linter machines during saw blade resharpening. Existing linter designs suffer from aerodynamic instability inside the working chamber, leading to mechanical seed damage (up to 4.2–5.5%), fiber re-entanglement, and a 15–20% increase in specific energy consumption. To address these limitations, a coupled mathematical model is developed that integrates the "slow" geometric evolution of the saw-nozzle clearance across resharpening cycles (n = 0 ... 11) with the "fast" nonlinear pneumatic dynamics of the air chamber and lint tuft detachment mechanics. A kinematically generalized clearance compensation mechanism is formulated, and an analytical criterion for the permissible air flow rate Q_min(n) ≤ Q(n,T) ≤ Q_upper(n) is derived to ensure complete fiber doffing without re-entanglement throughout the entire service life of the saw cylinder. Furthermore, a comparative technical and economic evaluation of saw blades manufactured from 65G steel demonstrates a 2.5-fold increase in operational lifespan (360 hours for high-grade cotton and 240 hours for low-grade cotton) and significant cost savings in cotton ginning enterprises.

References

1.Mamadaliyev F.Z. Paxta chigitini linterlash jarayonida momiqni ajratish tizimini takomillashtirish: diss. PhD texn. fanlari: 05.02.03 / Ilmiy rahbar D.U. Madraximov; Andijon mashinasozlik instituti. Namangan, 2024. – 110 b.

2.Идельчик И.Е. Справочник по гидравлическим сопротивлениям / Под ред. М.О. Штейнберга. 3-е изд., перераб. и доп. М.: Машиностроение, 1992. – 672 с.

3.Mangialardi G.J., Anthony W.S. Cotton Gin Saw Developments // National Cotton Ginners’ Association / USDA Agricultural Research Service technical publication. – Arrali jin stanoklari va momiqni havo yordamida ajratib olish (doffing) tizimlarining konstruktiv yechimlari sharhi; arrali silindrdan tolalarni aerodinamik ajratish bo‘yicha xalqaro tajriba manbasi sifatida keltirilgan.

4.Вентцель Е.С. Теория вероятностей. 10-е изд., стер. М.: Высшая школа, 2006. – 575 с. (momiqni ajratish sifatining ehtimollik mezonini qurishda qo‘llanilgan, 2.7-band).

5.Mamadaliyev F.Z.-Analysis of problem in the aerodynamic system of cottonseed lintering equipment in cotton processing plants.

Downloads

Published

2026-11-19