RECOVERY OF ZEOLITE WASTE AT PURIFICATION OF NATURAL GASES
Keywords:
adsorption, zeolite waste, desulfurization, natural gas, desorption characteristics.Abstract
The purpose of this work is to study the degree and structure of contamination of spent zeolites and their effect on adsorption-desorption characteristics in natural gas desulfurization processes, to determine the number and structure of zeolite transport pores and their role in the adsorption process, to develop an optimal method for the recovery of zeolite waste for their secondary use in desulfurization processes.
References
1.Mahamajanov, M. I. A., Alimova, Z. H., &Magdiev, K. E. (2022). Recovery of zeolite waste for reuse in the purification of natural gases. European Journal of Interdisciplinary Research and Development, 8, 1-4.
2.M.A.Mahamajanov. Contamination of zeolites in adsorption-desorption cycles // Tashkent, 1995. 8c. dep.in GFNTI GKNT RUz. from 10.03.95, for N 2350-Uz.95
3.Makhamadjanov, M. I., Alimova, Z. K., Akhmatjanov, R. N., Magdiev, K. I., & Samataev, T. (2024, March). Recovery of zeolite waste for reuse during cleaning natural gases. In AIP Conference Proceedings (Vol. 3045, No. 1). AIP Publishing.
4.Makhamadjanov, M. I., Alimova, Z., & Magdiev, K. (2022). Utilization of zeolite waste for use in the adsorption treatment of natural gases. International Bulletin of Engineering and Technology, 2(11), 60-63.
5.Akhmatjanovich, M. M. I., Xamidullaevna, A. Z., & Irgashevich, M. K. Utilization of zeolite waste for use in the adsorption treatment of natural gases. structure, 3, 15.
6.Hamidullayevna, A. Z., Kabulovna, S. D., & Parpiyevna, N. G. (2022). Operability of the boundary layers of lubricants during operation.
7.Khamidullaevna, A. Z., Parpiena, N. G., & Kabulovna, S. D. (2022). Study of the Work of the Boundary Layers of Lubricants Materials. Academicia Globe: Inderscience Research, 3(12), 119-122.
8.Hamidullayevna, A. Z., Parpiyevna, N. G., & Kabulovna, S. D. (2022). Causes of Contamination of Lubricants Used in Diesel Engines. Texas Journal of Engineering and Technology, 13, 44-46.